Pretrižavanje rabljene opreme Zatvori » Napredno pretraživanje

    Predaj upit
    Broj oglasa: 1

    Rabljeni Caterpillar d6 rezervni dijelovi

    Pregledajte trenutno dostupnu ponudu u kategoriji rabljenih rezervni dijelovi za prodaju na Mascusu. Najnoviji oglasi se nalaze na vrhu strane. Mozete sortirati oglase po ceni ili godini proizvodnje, radnim satima ili zemlji. Takođe mozete videti ostale rabljena transoportna vozila ili pregledati sve transportne oglase grupisane po modelu.

    Pročitaj više Zatvori
    Filter
    oglasi/stranica
    Stranica
    Kreieraj e-mail upozorenje
    Caterpillar d6 specs

    • Caterpillar D6

      Dimentions
      Dimensions
      1.18333333333333 ft in
      6.33333333333333 ft in
      10.8 ft in
      24 in
      116.7 in
      106 in
      186.2 in
      10.4083333333333 ft in
      Dimensions - Lgp
      361 in
      11 ft in
      48611 lb
      30 in
      116.7 in
      224.4 in
      118.1 in
      Dimensions - Lgp (30-In)
      117 in
      14.2 in
      82 in
      11.8 ft in
      118 in
      186.2 in
      30 in
      124.9 in
      50130 lb
      Dimensions – Lgp (36-In)
      127.8 in
      16.2 in
      90 in
      137.4 in
      153.6 in
      125.1 in
      126.9 in
      36 in
      Dimensions - Lgp Vpat
      14.2 in
      12 ft in
      233.6 in
      30 in
      132 in
      13 ft in
      51122 lb
      Dimensions – Lgp Vpat (30-In)
      132.1 in
      15.4 in
      90 in
      13.2 ft in
      126.9 in
      50650 lb
      202.1 in
      30 in
      Dimensions – Lgp Vpat (36-In)
      132.1 in
      15.1 in
      94 in
      202.1 in
      126.9 in
      36 in
      51875 lb
      14.3 ft in
      Dimensions - Lgp Vpat (Wide Gauge)
      132 in
      14.2 in
      94 in
      13 ft in
      14 ft in
      52526 lb
      125 in
      233.6 in
      36 in
      Dimensions - Lgp (Wide Gauge)
      128 in
      14.2 in
      90 in
      125.1 in
      36 in
      51441 lb
      13 ft in
      224.4 in
      137.4 in
      Dimensions - Vpat
      127.8 in
      16.6 in
      82 in
      24 in
      11 ft in
      202.1 in
      49030 lb
      126.9 in
      12 ft in
      Specifications
      Engine
      U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final
      Cat C9.3B
      All non-road Tier 4 Interim and Final, Stage IIIB, IV and V, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec,
      Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
      The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
      215 hp
      219 hp
      20A
      Service Refill Capacities
      90 gal
      7.4 gal
      Hydraulic Controls - Pressures
      NaN
      Blades - Capacity
      5.8 yd3
      7.4 yd3
      7.5 yd3
      5.4 yd3
      6.4 yd3
      Blades - Width
      5 yd3
      5.8 yd3
      10.9 ft in
      7.5 yd3
      5.4 yd3
      6.4 yd3

    • Caterpillar D6R WH (1997)

      Dimentions
      Blades
      Dimensions
      1.25833333333333 ft in
      10.3 ft in
      202.8 in
      7.5 ft in
      13.35 ft in
      Undercarriage
      0.516666666666667 ft in
      1.8 ft in
      8.6 ft in
      Specifications
      Engine
      6
      638 cu in
      4.75 in
      6 in
      Cat 3306
      165 hp
      1900 rpm
      Operational
      45370 lb
      Transmission
      2.42 mph
      4.23 mph
      7.39 mph
      2.98 mph
      5.41 mph
      9.51 mph
      Service Refill Capacities
      101 gal

    • Caterpillar D6T WH (Tier 4 Interim/Stage IIIB) (2011)

      Dimentions
      Blades
      13.7 ft in
      13.3 ft in
      13.7 ft in
      14.3 yd3
      14.3 yd3
      12.3 yd3
      6.7 yd3
      5.5 yd3
      10.7 ft in
      11.7 ft in
      Undercarriage
      1.25 ft in
      2.6 in
      4.6 in
      4 in
      3.9 in
      8 in
      74 in
      80 in
      90 in
      128 in
      112 in
      36 in
      31 in
      30 in
      28 in
      22 in
      9223 in2
      7905 in2
      4929 in2
      6680 in2
      6246 in2
      Specifications
      Engine
      567 cu in
      4.5 in
      5.9 in
      U.S. Tier 4 Interim/EU Stage IIIB
      205 hp
      205 hp
      205 hp
      229 hp
      Cat C9.3 ACERT
      205 hp
      227 hp
      208 hp
      230 hp
      Drive Train
      Mechanical
      Operational
      54791 lb
      Transmission
      3.2 mph
      5.3 mph
      4.1 mph
      5.3 mph
      2.3 mph
      4.1 mph
      3 mph
      5.2 mph
      46410 lb
      25360 lb
      7.1 mph
      9 mph
      79910 lb
      46410 lb
      25360 lb
      Weights
      51586 lb
      44084 lb
      51121 lb
      44084 lb
      53900 lb
      46191 lb
      53286 lb
      46191 lb
      58397 lb
      51095 lb
      54791 lb
      48365 lb
      59457 lb
      52147 lb
      48365 lb
      57066 lb
      Service Refill Capacities
      17 gal
      112 gal
      3.6 gal
      17.3 gal
      6.5 gal
      39.1 gal
      1.3 gal
      6.6 gal
      Standards
      Brakes meet the International Standard ISO 10265:2008.
      ROPS meets criteria ISO 3471:1994, 2008 FOPS meets ISO 3449:1992, 2005 Level II
      Meets appropriate standards as listed below.
      Hydraulic Controls - Main Relief Valve
      3150 psi
      3540 psi
      Hydraulic Controls - Maximum Operating Pressure
      5800 psi
      2800 psi
      3125 psi
      2800 psi
      3125 psi
      3125 psi
      2800 psi
      3125 psi
      Hydraulic Controls - Pump
      50 gal/min
      50 gal/min
      52 gal/min
      54 gal/min
      29 gal/min
      2135 rpm
      2854 rpm
      45 gal/min
      2135 rpm
      25 gal/min
      Rippers
      14557 lb
      20137 lb
      87 in
      3606 lb
      163 lb
      26 degrees
      39.4 in
      78.8 in
      74 mm 175 mm (2.9 in 6.9 in)
      Fixed Parallelogram
      3
      20.2 in
      18 in
      Winches
      17.8 gal
      PA56
      14.4 in
      10 in
      Mechanical
      89800 lb
      76300 lb
      130 ft/min
      224 ft/min
      34.3 in
      19.9 in
      12.4 in
      2652 lb
      47.8 in
      35.5 in
      Electric
      0.88 in
      38.4 in
      54 mm 67 mm (2.1 in 2.6 in)
      20.4 in
      281 ft in
      218 ft in

    • Caterpillar D6N Tier 4 Interim/Stage IIIB

      Dimentions
      Blades
      5.06 yd3
      13.39 ft in
      5.06 yd3
      13.39 ft in
      5.6 yd3
      10.35 ft in
      9.84 ft in
      4.33 yd3
      10.73 ft in
      Undercarriage
      74.4 in
      122.56 in
      102.8 in
      33.07 in
      24.01 in
      8107 in2
      4929 in2
      2.2 in
      2.6 in
      85.03 in
      Specifications
      Ripper
      216 mm 254 mm (8.5 in 10.0 in)
      3
      20.2 in
      15.6 in
      Fixed Parallelogram
      3.28 ft in
      6.56 ft in
      73 mm 176 mm (2.9 in 6.9 in)
      24.5 in
      11600 lb ft
      47480 lb ft
      9667 lb ft
      38217 lb ft
      172 lb
      3444 lb
      86.7 in
      3
      Engine
      402.75 cu in
      4.13 in
      4.99 in
      U.S. Tier 4 Interim, EU Stage IIIB, Japan 2011 (Tier 4 Interim)
      150 hp
      148 hp
      177 hp
      Cat C6.6 ACERT
      150 hp
      173 hp
      152 hp
      175.3 hp
      156.6 hp
      150 hp
      Operational
      36392 lb
      Transmission
      2.86 mph
      4.66 mph
      3.17 mph
      1.93 mph
      3.54 mph
      1.93 mph
      6.21 mph
      5.28 mph
      7.21 mph
      71939 lb
      39341.6 lb
      21806.5 lb
      4 mph
      Weights
      39895 lb
      38788 lb
      35602 lb
      36392 lb
      2341 lb
      2720 lb
      2762 lb
      3287 lb
      5732 lb
      2912 lb
      3444 lb
      3166 lb
      See value and note, next page
      Service Refill Capacities
      10.56 gal
      79 gal
      2.25 gal
      7.79 gal
      Standards
      Brakes meet the standard ISO 10265:2008
      Meets ROPS criteria SAE J1040-1994, ISO 3471:2008 and DLV criteria SAE J397B-2009, ISO 3164:1995.
      Meets ISO 3449-2005 Level II and DLV criteria SAE J397B-2009, ISO 3164:1995.
      Sustainability - Sound And Vibration Levels
      *Values are for an experienced operator in a dozing application; consult the Operating and Maintenance Manual for details.
      83 dB(A) (SAE J88:2006)
      78 dB(A) (ISO 6396:2008)
      110 dB(A) (2000/14/EC)
      2.5 m/s2 (ISO 5349:2001)
      0.5 m/s2 (ISO/TR25398:2006)
      <0.7 (ISO 7096:2000 - spectral class EM6)
      Winch
      19.8 in
      19.55 gal
      PA55
      45.1 in
      288.71 ft in
      Mechanical
      Electric
      38.4 in
      10 in
      12.4 in
      0.75 in
      54 mm 67 mm (2.13 in 2.63 in)
      147 ft/min
      257 ft/min
      38.4 in
      2814 lb
      69200 lb
      54100 lb
      * Weight: Includes pump, operator controls, oil, mounting brackets and spacers.

    • Caterpillar D6K2 (Tier 4 Interim/Stage IIIB) (2012)

      Dimentions
      Blades
      4.38 yd3
      12 ft in
      4.01 yd3
      10.5 ft in
      Undercarriage
      1.9 in
      30 in
      22 in
      79 in
      70 in
      104 in
      104 in
      6200 in2
      4650 in2
      Specifications
      Ripper
      165 211 mm (6.5 8.3 in)
      3
      Fixed Parallelogram
      2.94166666666667 ft in
      5.88333333333333 ft in
      58.5 138 mm (2.3 5.4 in)
      9480 lb ft
      37480 lb ft
      10138 lb ft
      37480 lb ft
      75 lb
      76.8 in
      1863 lb
      14.2 in
      Engine
      402.75 cu in
      4.13 in
      4.99 in
      U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4
      130 hp
      128 hp
      158 hp
      Cat C6.6 ACERT
      130 hp
      155 hp
      132 hp
      157 hp
      130 hp
      Operational
      29346 lb
      Weights
      30750 lb
      30353 lb
      28949 lb
      29346 lb
      28740 lb
      30144 lb
      Service Refill Capacities
      8.58 gal
      77.9 gal
      15.3 gal
      4.35 gal
      6 gal
      4 gal
      Standards
      Standards
      Standards
      Standards
      Winch
      18 in
      PA50
      33.2 in
      Hydrostatic
      8 in
      11 in
      0.75 in
      124 ft/min
      230 ft/min
      35.6 in
      2000 lb
      50000 lb
      26000 lb
      0.87 in
      2.13 in
      220 in
      2.63 in
      306 in
      Sustainability
      79 dB(A) (SAE J88:2006)
      109 dB(A) (2000/14/EC)
      78 dB(A) (ISO 6396:2008)
      2.5 m/s2 (ISO 5349:2001)
      0.5 m/s2 (ISO/TR 25398:2006)
      ISO 7096:2000 - spectral class EM6
      Fully complies with U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 emission standards
      Transmission - Travel Speed
      Hydrostatic
      0-10 km/h (0-6.2 mph)
      0-10 km/h (0-6.2 mph)

    Ovde je kompletna lista polovnih Caterpillar d6, D 6 R rezervni dijelovi za prodaju.  Mozete da dodate strane među svoje omiljene strane ili upoređujete zanimljive proizvode klikom na polja za potvrdu pored polovnih/og Caterpillar d6, D 6 R rezervni dijelovi koji su Vam zanimljive, uz korišćenje opcija koje se nalaze iznad. Ako zelite da promenite pretragu, vratite se na vrh strane i koristite opciju “nova pretraga”, onda definišite brend, model, cenu i/ili lokaciju polovne/ih Caterpillar d6, D 6 R rezervni dijelovi koje Vas interesuju.

    Kontaktirajte Mascus ukoliko ste zainteresovani za kamione, delove za kamione, laka dostavna vozila ­i autobuse, kao i za oglase kamiona, autobusa i transportnih vozila koje dodaju svakodnevno.

    Pročitaj više Zatvori