RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoSve kategorije
Oglasi!

Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150

Cijena isklj. PDV

Compnay LOGO
Images3
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150 Bušilice (svrdla)
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150 Bušilice (svrdla)
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150 Bušilice (svrdla)
FavoriteFavoriti
shareDio
Save searchSpremi pretragu
Ispis

INFO

Grupa proizvoda / vozila
Bušilice (svrdla)
Marka / model
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150
Godina proizvodnje
2019
Dodatne opcije
Novo/nekorišćeno
Država
Kina
Mascus ID
1061C6FF

CIJENE

Izaberite valutu

DETALJI

Uvjeti isporuke
FOB, CFR, CIF, EXW
Ostale informacije
Product description 1:Out of the trouble of foot valve fracture and expansion and contraction 2:Lower energy consumption and higher impact frequency,the drilling speed is 15%-30% higher than conventional DTH hammers: 3:Simple structure,reliable parts,long life,easy and low cost maintenance 4:Low air and oil consumption,the oil consumption is about 10% lower than the conventional DTH hammers. Product Application DTH hammers and bits are widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering.it has the advantage of high flatness, smooth hole wall,high rigid of drill rod and hammer,independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. Product Advantages 1. Appearance: Since the heating process has a complete and stable process, the appearance of the product can be kept consistent, and the appearance will not be angular and will not hurt the hand. 2. Product intrinsic: The service life has completely exceeded atlas and sandvic. 3. QC:4 times inspection and 1 test. 4. First inspection: quality management will conduct all inspections at the beginning of product production. 5. Sampling inspection: the product will be sampled during processing. 6. Quality inspection: Full inspection is performed every time the next process is delivered. 7. Final inspection: the product is sent to the inspection room for final inspection.Prikaži više

Changsha SOLLROC Engineering Equipments Co., Ltd

No.55 Jiucaiyuan, Wenyi road, Furong District 410001 Changsha Hunan 湖南 Kina
8
Godine na Mascusu
Get email notification
Prikaži sve oglase od Changsha SOLLROC Engineering Equipments Co., Ltd
report adPrijavi sumnjiv oglas