Pretrižavanje rabljene opreme Zatvori » Napredno pretraživanje

    Predaj upit
    Broj oglasa: 110

    Rabljeni Caterpillar 160 gradnja ceste

    Pregledajte kategoriju rabljenih gradnja ceste, dodatna oprema za prodaju na Mascus.hr. Najnoviji oglasi se nalaze na vrhu strane. Mozete sortirati oglase po cijeni, godini proizvodnje, radnim satima ili zemlji. Takođe mozete videti ostale rabljene gradjevinarske strojeve ili pregledati sve gradjevinarske strojeve grupisane po modelu.

    Pročitaj više Zatvori
    Filter
    oglasi/stranica
    Stranica
    Kreieraj e-mail upozorenje
    Caterpillar 160 specs

    • Caterpillar 160M AWD (2014)

      Dimentions
      Dimensions
      13.3 in
      128 in
      23.5 in
      130 ft in
      133 in
      119 in
      60 in
      241 in
      100 in
      344 in
      399 in
      386 in
      102 in
      98 in
      87 in
      Specifications
      Ripper
      26259 lb
      16.8 in
      5
      20540 lb
      39.2 in
      21 in
      Engine
      6
      Frame
      12 ft in
      12 ft in
      0.6 ft in
      Engine
      537 cu in
      4.4 in
      5.9 in
      Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
      Cat C9 ACERT
      Maximum torque (VHP Plus) measured at 1,000 rpm.
      Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
      Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator.
      Power as declared per ISO 14396; Rated Speed = 2,000 rpm; AWD = 201 kW (269 hp)
      No engine derating required up to 3048 m (10,000 ft).
      10000 ft in
      213 hp
      2,000 rpm
      122 degrees
      216 hp
      991 lb ft
      1,650 rpm
      600 rpm
      159-200 kW (213-268 hp)
      159-200 kW (216-272 hp)
      Frame
      61.1 in
      6 in
      22.5 in
      1.6 in
      32 degrees
      3 in
      18 degrees
      6.3 in
      Engine
      40%
      213 hp
      Power Train
      Multiple oil disc
      Multiple oil disc
      Direct drive, power shift, countershaft
      8 Forward/6 Reverse
      Dual circuit control system
      3565 in2
      Weights
      Base operating weight on standard machine configuration is calculated with full fuel tank, coolant, lubricants, operator and 14.0R24 tires with multi-piece (MP) rims.
      45432 lb
      45432 lb
      Hydraulic System
      450 psi
      3500 psi
      Variable piston
      Electro-hydraulic load sensing, closed center
      Pump output measured at 2,150 rpm.
      55.7 gal/min
      Moldboard
      12 ft in
      16.3 in
      3.7 in
      6 in
      0.6 in
      6 in
      0.6 in
      24 in
      0.87 in
      35344 lb
      47515 lb
      12 ft in
      18868 lb
      28998 lb
      Blade pull calculated at 0.9 traction coefficient, which is equal to no-slip conditions, and Gross Vehicle Weight (GVW).
      Operating Specifications
      29.5 mph
      23.3 mph
      24.93 ft in
      47.5 degrees
      20 degrees
      29.5 mph
      20.3 mph
      14.7 mph
      10.8 mph
      7 mph
      5 mph
      3.5 mph
      2.5 mph
      23.3 mph
      16 mph
      8.5 mph
      5.5 mph
      3.8 mph
      2 mph
      Standards
      ISO 3450:1996
      ISO 3471:2008, ISO 3449:2005 Level II
      ISO 6394:2008, ISO 6395:2008
      The static operator sound pressure level is 73 dB(A) when ISO 6394:2008 is used to measure the value for an enclosed cab. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
      The dynamic spectator sound pressure level is 107 dB(A) when ISO 6395:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed.
      ISO 5010:2007
      Service Refill
      10.6 gal
      7.9 gal
      16.9 gal
      21.1 gal
      1.8 gal
      0.13 gal
      110 gal
      17.2 gal
      Blade Range
      28.7 in
      27.4 in
      37.4 in
      32.3 in
      40 degrees
      5 degrees
      89.7 in
      82.3 in
      17.8 in
      29.5 in
      90 degrees
      Scarifier
      9
      11
      47.4 in
      18.4 in
      5, 11
      4.6 in
      46.6 in
      11.5 in
      4.6 in
      91 in
      10.5 in
      10.5 in
      Tandems
      22.5 in
      8 in
      1 in
      0.7 in
      2 in
      60 in
      15 degrees
      25 degrees
      Weights - Awd
      10992 lb
      28278 lb
      39270 lb
      16894 lb
      35900 lb
      52794 lb
      45431 lb
      13455 lb
      31976 lb
      Net Power - Awd Off
      213 hp
      218 hp
      223 hp
      228 hp
      233 hp
      238 hp
      243 hp
      248 hp
      213 hp
      218 hp
      223 hp
      Net Power - Awd On
      223 hp
      238 hp
      243 hp
      248 hp
      268 hp
      268 hp
      268 hp
      268 hp
      213 hp
      218 hp
      223 hp
      Net Power - Vhp Plus
      213 hp
      218 hp
      223 hp
      228 hp
      233 hp
      238 hp
      243 hp
      248 hp
      213 hp
      218 hp
      223 hp

    • Caterpillar 160M3 AWD (2014)

      Dimentions
      Dimensions
      13.3 in
      128 in
      23.5 in
      10.8333333333333 ft in
      120 in
      60 in
      399 in
      241 in
      100 in
      351 in
      98.9 in
      98.9 in
      84.3 in
      Specifications
      Ripper
      28493 lb
      16.8 in
      5
      20812 lb
      40.6 in
      21 in
      Engine
      6
      Frame
      1.05 ft in
      1 ft in
      Engine
      39 %
      567.5 cu in
      4.5 in
      5.9 in
      U.S. EPA Tier 4 Final/EU Stage IV
      Cat C9.3 ACERT
      10000 ft in
      221 hp
      109 degrees
      2,000 rpm
      122 degrees
      172-219 kW (231-293 hp)
      224 hp
      172-219 kW (234-298 hp)
      1079 lb ft
      1,550 rpm
      272 hp
      221 hp
      231 hp
      241 hp
      231 hp
      241 hp
      252 hp
      257 hp
      262 hp
      267 hp
      272 hp
      272 hp
      221 hp
      231 hp
      241 hp
      241 hp
      262 hp
      267 hp
      272 hp
      293 hp
      293 hp
      293 hp
      293 hp
      221 hp
      231 hp
      241 hp
      1,400 rpm
      1000 lb ft
      500 rpm
      165-203 kW (221-272 hp)
      165-203 kW (224-276 hp)
      221 hp
      231 hp
      241 hp
      252 hp
      257 hp
      262 hp
      267 hp
      Frame
      61.1 in
      6 in
      23.5 in
      1.6 in
      32 degrees
      0.5 in
      3 in
      12 in
      0.87 in
      18 degrees
      6.3 in
      Power Train
      Multiple Oil Disc
      Multiple Oil Disc
      APECS, Direct Drive, Powershift
      8 Forward/6 Reverse
      Dual Circuit Control
      3565 in2
      Weights
      47514 lb
      Hydraulic System
      885 psi
      3503 psi
      Variable Piston
      Parallel
      55.5 gal/min
      16.9 gal
      Moldboard
      14 ft in
      16.3 in
      6.5 in
      6 in
      0.6 in
      6 in
      0.6 in
      24 in
      0.87 in
      36817 lb
      49630 lb
      18935 lb
      29308 lb
      14 ft in
      Operating Specifications
      29.5 mph
      23.3 mph
      25.59 ft in
      50 degrees
      20 degrees
      29.5 mph
      20.3 mph
      14.7 mph
      10.8 mph
      7 mph
      5.1 mph
      3.5 mph
      2.6 mph
      23.3 mph
      16 mph
      8.5 mph
      5.5 mph
      3.8 mph
      2 mph
      Standards
      ISO 3450
      ISO 3471; ISO 3499
      ISO 6394; ISO 6395
      ISO 5010
      Service Refill
      15 gal
      26.4 gal
      7.9 gal
      16.9 gal
      22.9 gal
      1.8 gal
      0.13 gal
      104 gal
      18.5 gal
      5.8 gal
      Blade Range
      28.7 in
      27.4 in
      26 in
      20.1 in
      40 degrees
      5 degrees
      89.7 in
      82.3 in
      17.8 in
      29.5 in
      90 degrees
      Scarifier
      47.4 in
      9
      11
      40.6 in
      18.4 in
      5/11
      4.6 in
      46.6 in
      11.5 in
      4.6 in
      84 in
      16.8 in
      10.5 in
      Tandems
      22.5 in
      8 in
      0.69 in
      0.71 in
      2 in
      60 in
      15 degrees
      25 degrees
      Weights - Awd
      11033 lb
      29875 lb
      40908 lb
      17075 lb
      38069 lb
      55144 lb
      14289 lb
      33225 lb
      47514 lb

    • Caterpillar 160M (Environment Canada Tier 3) (2013)

      Dimentions
      Dimensions
      13.3 in
      128.2 in
      23.5 in
      130.2 ft in
      133 in
      119.7 in
      60 in
      241.1 in
      100.5 in
      344.6 in
      399.1 in
      386.5 in
      98.9 in
      98.9 in
      84.3 in
      Specifications
      Ripper
      26259 lb
      16.8 in
      5
      20540 lb
      39.2 in
      21 in
      Engine
      6
      Frame
      12 ft in
      12 ft in
      0.6 ft in
      Engine
      537 cu in
      4.4 in
      5.9 in
      Engine is Certified for Environment Canada Tier 3 Standards
      Cat C9 ACERT
      10000 ft in
      213 hp
      2,000 rpm
      122 degrees
      1,650 rpm
      912 lb ft
      600 rpm
      159-185 kW (213-248 hp)
      Frame
      61.1 in
      6 in
      22.5 in
      1.6 in
      32 degrees
      3 in
      18 degrees
      6.3 in
      Engine
      40%
      1,450 rpm
      600 rpm
      109 degrees
      Power Train
      Multiple oil disc
      Multiple oil disc
      Direct drive, power shift, countershaft
      8 Forward/6 Reverse
      Dual circuit control system
      3565 in2
      Weights
      31061 lb
      12404 lb
      43465 lb
      43465 lb
      37082 lb
      43465 lb
      52794 lb
      27215 lb
      9867 lb
      16894 lb
      35900 lb
      Hydraulic System
      450 psi
      3500 psi
      Variable piston
      Electro-hydraulic load sensing, closed center
      55.7 gal/min
      Moldboard
      12 ft in
      16.3 in
      3.7 in
      6 in
      0.6 in
      6 in
      0.6 in
      24 in
      0.87 in
      12 ft in
      32310 lb
      24494 lb
      28998 lb
      16936 lb
      Operating Specifications
      29.5 mph
      23.3 mph
      24.93 ft in
      47.5 degrees
      20 degrees
      29.5 mph
      20.3 mph
      14.7 mph
      10.8 mph
      7 mph
      5 mph
      3.5 mph
      2.5 mph
      23.3 mph
      16 mph
      8.5 mph
      5.5 mph
      3.8 mph
      2 mph
      Standards
      ISO 3450:1996
      ISO 3471:1994, ISO 3449:1992
      ISO 6394:2008, ISO 6395:2008
      ISO 5010:2007
      Service Refill
      10.6 gal
      7.9 gal
      16.9 gal
      21.1 gal
      1.8 gal
      0.13 gal
      110 gal
      17.2 gal
      Blade Range
      28.7 in
      27.4 in
      37.4 in
      32.3 in
      40 degrees
      5 degrees
      89.7 in
      82.3 in
      17.8 in
      29.5 in
      90 degrees
      Scarifier
      9
      11
      47.4 in
      18.4 in
      5/11
      4.6 in
      46.6 in
      11.5 in
      4.6 in
      91 in
      10.5 in
      10.5 in
      Tandems
      22.5 in
      8 in
      1 in
      0.7 in
      2 in
      60 in
      15 degrees
      25 degrees
      Net Power - Vhp Plus
      213 hp
      218 hp
      223 hp
      228 hp
      233 hp
      238 hp
      243 hp
      248 hp
      213 hp
      218 hp
      223 hp

    • Caterpillar 160M3/160M3 AWD (2014)

      Dimentions
      Dimensions
      13.3 in
      128 in
      23.5 in
      10.8333333333333 ft in
      120 in
      60 in
      399 in
      241 in
      100 in
      351 in
      98.9 in
      98.9 in
      84.3 in
      Specifications
      Ripper
      28493 lb
      16.8 in
      5
      20812 lb
      40.6 in
      21 in
      Engine
      6
      Frame
      1.05 ft in
      1 ft in
      Engine
      39 %
      567.5 cu in
      4.5 in
      5.9 in
      U.S. EPA Tier 4 Final/EU Stage IV
      Cat C9.3 ACERT
      10000 ft in
      221 hp
      109 degrees
      2,000 rpm
      122 degrees
      224 hp
      1,550 rpm
      272 hp
      221 hp
      231 hp
      241 hp
      1,400 rpm
      1000 lb ft
      500 rpm
      165-203 kW (221-272 hp)
      165-203 kW (224-276 hp)
      221 hp
      231 hp
      241 hp
      252 hp
      257 hp
      262 hp
      267 hp
      Frame
      61.1 in
      6 in
      23.5 in
      1.6 in
      32 degrees
      0.5 in
      3 in
      12 in
      0.87 in
      18 degrees
      6.3 in
      Power Train
      Multiple Oil Disc
      Multiple Oil Disc
      APECS, Direct Drive, Powershift
      8 Forward/6 Reverse
      Dual Circuit Control
      3565 in2
      Weights
      45547 lb
      38719 lb
      55144 lb
      45547 lb
      28812 lb
      13237 lb
      32310 lb
      9907 lb
      17075 lb
      38069 lb
      Hydraulic System
      885 psi
      3503 psi
      Variable Piston
      Parallel
      55.5 gal/min
      16.9 gal
      Moldboard
      14 ft in
      16.3 in
      6.5 in
      6 in
      0.6 in
      6 in
      0.6 in
      24 in
      0.87 in
      14 ft in
      34262 lb
      25931 lb
      17004 lb
      29308 lb
      Operating Specifications
      29.5 mph
      23.3 mph
      25.59 ft in
      50 degrees
      20 degrees
      29.5 mph
      20.3 mph
      14.7 mph
      10.8 mph
      7 mph
      5.1 mph
      3.5 mph
      2.6 mph
      23.3 mph
      16 mph
      8.5 mph
      5.5 mph
      3.8 mph
      2 mph
      Standards
      ISO 3450
      ISO 3471; ISO 3499
      ISO 6394; ISO 6395
      ISO 5010
      Air Conditioning System
      The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
      Service Refill
      15 gal
      26.4 gal
      7.9 gal
      16.9 gal
      22.9 gal
      1.8 gal
      0.13 gal
      104 gal
      18.5 gal
      5.8 gal
      Blade Range
      28.7 in
      27.4 in
      26 in
      20.1 in
      40 degrees
      5 degrees
      89.7 in
      82.3 in
      17.8 in
      29.5 in
      90 degrees
      Scarifier
      47.4 in
      9
      11
      40.6 in
      18.4 in
      5/11
      4.6 in
      46.6 in
      11.5 in
      4.6 in
      84 in
      16.8 in
      10.5 in
      Tandems
      22.5 in
      8 in
      0.69 in
      0.71 in
      2 in
      60 in
      15 degrees
      25 degrees

    • Caterpillar 160M/160M AWD (Environment Canada Tier 3) (2013)

      Dimentions
      Dimensions
      13.3 in
      128.2 in
      23.5 in
      10.85 ft in
      133 in
      119.7 in
      60 in
      241.1 in
      100.5 in
      344.6 in
      399.1 in
      386.5 in
      98.9 in
      98.9 in
      84.3 in
      Specifications
      Ripper
      26259 lb
      16.8 in
      5
      20540 lb
      39.2 in
      21 in
      Engine
      6
      Frame
      1 ft in
      1 ft in
      0.05 ft in
      Engine
      537 cu in
      4.4 in
      5.9 in
      Engine is Certified for Environment Canada Tier 3 Standards
      Cat C9 ACERT
      10000 ft in
      213 hp
      2,000 rpm
      122 degrees
      1,650 rpm
      912 lb ft
      600 rpm
      159-185 kW (213-248 hp)
      Frame
      61.1 in
      6 in
      22.5 in
      1.6 in
      32 degrees
      3 in
      18 degrees
      6.3 in
      Engine
      40%
      1,450 rpm
      600 rpm
      109 degrees
      Power Train
      Multiple oil disc
      Multiple oil disc
      Direct drive, power shift, countershaft
      8 Forward/6 Reverse
      Dual circuit control system
      3565 in2
      Weights
      31061 lb
      12404 lb
      43465 lb
      43465 lb
      37082 lb
      43465 lb
      52794 lb
      27215 lb
      9867 lb
      16894 lb
      35900 lb
      Hydraulic System
      450 psi
      3500 psi
      Variable piston
      Electro-hydraulic load sensing, closed center
      55.7 gal/min
      Moldboard
      12 ft in
      16.3 in
      3.7 in
      6 in
      0.6 in
      6 in
      0.6 in
      24 in
      0.87 in
      12 ft in
      32310 lb
      24494 lb
      28998 lb
      16936 lb
      Operating Specifications
      29.5 mph
      23.3 mph
      24.93 ft in
      47.5 degrees
      20 degrees
      29.5 mph
      20.3 mph
      14.7 mph
      10.8 mph
      7 mph
      5 mph
      3.5 mph
      2.5 mph
      23.3 mph
      16 mph
      8.5 mph
      5.5 mph
      3.8 mph
      2 mph
      Standards
      ISO 3450:1996
      ISO 3471:1994, ISO 3449:1992
      ISO 6394:2008, ISO 6395:2008
      ISO 5010:2007
      Service Refill
      10.6 gal
      7.9 gal
      16.9 gal
      21.1 gal
      1.8 gal
      0.13 gal
      110 gal
      17.2 gal
      Blade Range
      28.7 in
      27.4 in
      37.4 in
      32.3 in
      40 degrees
      5 degrees
      89.7 in
      82.3 in
      17.8 in
      29.5 in
      90 degrees
      Scarifier
      9
      11
      47.4 in
      18.4 in
      5/11
      4.6 in
      46.6 in
      11.5 in
      4.6 in
      91 in
      10.5 in
      10.5 in
      Tandems
      22.5 in
      8 in
      1 in
      0.7 in
      2 in
      60 in
      15 degrees
      25 degrees
      Net Power - Vhp Plus
      213 hp
      218 hp
      223 hp
      228 hp
      233 hp
      238 hp
      243 hp
      248 hp
      213 hp
      218 hp
      223 hp

    Ovdje je kompletna lista polovnih Caterpillar 160, 160 H, 160 M VHP Plus, 160 M, 160 K, 160 M 2 AWD gradnja ceste za prodaju. Mozete da dodate strane medu svoje omiljene strane ili uporedujete zanimljive proizvode klikom na polja za potvrdu pored polovnih/og Caterpillar 160, 160 H, 160 M VHP Plus, 160 M, 160 K, 160 M 2 AWD gradnja ceste koji su Vam zanimljive, uz korišcenje opcija koje se nalaze iznad. Ako zelite da promenite pretragu, vratite se na vrh strane i koristite opciju “nova pretraga”.

    Ne zaboravite da redovno koristite Mascus, jer se svakodnevno dodaju novi oglasi za

    Pročitaj više Zatvori